Non Asbestos Gasket
This product is made from "Kevlar" Armada fiber, Vegetable fiber, and Mineral fiber, compressed and calendered under high temperature and pressure into a sheet form. It eliminates asbestos - Rubber sheet essentially and thoroughly.
Tooling to produce pipe-flange gaskets for every conceivable table including BST, ANSI and ASA is used to make flat gaskets for industries including Petrochemical.
Spiral Wound Gasket
Spiral Wound gaskets are supplied world-wide to reliably seal flanges which are subject to arduous pressure and temperature conditions. This type of gasket is able to accommodate pressures from high vacuum to over 700 bar (10000 psi) and seal at temperatures from cryogenic to 1650°C.
Metallic Gasket ::: Corrugated gaskets: Corrugated gaskets are ideal for irregular shapes and low pressure applications. They are available in a wide range of thin sheet materials.
Produce process: Cut metal compounded rubber sheet (MCR) according to tight surface, process it into wave shape composed by single layer or multiple layers, and realize sealing effect through wavy surface rubber. Limber waviness has favorable floating effect and vibration character, and can to a large extent reduce, even eliminate, torsion decrease of cylinder head bolt. It has better mechanical property, chemical resistance and longer sealing effect.
Rosco's Double Scaffold Clamps are manufactured using high tensile strength aluminum extrusion. The clamps are manufactured to exacting specifications ensuring consistent high performance. All bolts and wing nuts are zinc plated for maximum durability. Rosco Scaffold Clamps have a safe working load of 750Kg.
Perfect anti-crack. Advanced structure, cold-pressed molding sheet steel, strength and toughness exceed national current standard, eliminate potential accident that scaffold slumped caused by cast-iron broke.
Perfect anti-skid. Larger contact area between steel pipe and coupler, eliminate steel pipe skidding potential accident.
Our products include: Drop forged double coupler, swivel coupler, putlog coupler, girder coupler, board clamp and system scaffold. All of our products are produced under BS1139 and EN74 standards to satisfy the most rigorous of structural mechanical applications.
Tab Content 10
Elastic Rail Clips Mk III, Mk II, Mk I, J Type, e clips and antitheft elastic rail clips.
Metal Liner T – 3738, 3740, 3741 & 3742 & end cut Metal Liners.
Fish Plate for 52 Kg & 60 Kg Rail, Juggled Fish Plates, One Meter Long Special Fish Plate, Combination/Junction Fish Plate.
Fish Bolts & Nuts for Fish Plate and Bolts & Nuts for Point & Crossing of various sizes.
Lock Spike, Single Shank Spike, Double Shank Spike, Track Spike.
PVC Water Stoppers buries in the concrete, water stopper can bear the tensile stress caused by the contraction of the concreate & shearing stress formed by the changes at the joints of the concrete due to the sinking of the floor pan. In other words, under the static status of the concrete and the time when the above said stress is generated, it can produce marked effect leakage protection. Currently water stopper are widely used in large and small civil engineering.
Our product pvc water stop seal play a critical role in the integrity of concrete structures.PVC water stops fill up the joints to form a continuous watertight compartment. PVC water stops are profiles based on specially formulated plasticised PVC compound
Rubber Water stop Belt is widely used in various types of concrete structure.
Superior in rubber high elastic and compression deformation.
Produced under elastic deformation in variety load.
Joints in concrete structures, one side is subject to hydrostatic load, are provided with water stops bridging the joints and embedded in concrete on either side. In concrete joints where expansion and contraction cause the joints to close and open, water stop then are designed to accommodate itself to such movements.
These PVC Water Stopper Seal are made from very high quality raw material which ensures high durability at its user end. These PVC Water Stopper Seal are in high demand in the market. Different sizes and designs are easily available in the market. Our PVC Water Stopper Seal are available at industrial leading prices.
Gentec Heavy-Duty Oxy-Acytylene Cutting Torch — 21in., Model# 463AEL-21CV-C4
Heavy duty cutting: up to 300mm steel Die forged brass head for strength and durability Triple stainless steel gas tubs for maximum strength Two needle valves for fast and accurate flame adjustment Stainless steel lever for easy job Top stainless steel lever with hold down button
Heavy duty cutting: up to 200mm steel Brass heads are die-forged for extra strength Check valve inside the end of torch handle for safety Body and valve are threaded for easy replacement
Our wide range of heavy duty cutting torch are designed for rugged environments and is ideal for heavy cutting in scrap yards and steel mill operations. Our Heavy Duty Cutting Torches (NM Cutting Blow Pipe) have an extra edge over other available in market and can be designed as per specifications of customers.
These are manufactured as per IS 7653 standards and can be customized as per the clients specification. Furthermore, our products are incorporated with features like robust body made of all kinds of metals, gas tight seal of nozzle to ensure long life & smooth operation for long period. In addition, our range is designed to cut mild steel up to 300 mm thick and cast iron up to 75 mm thick. Moreover, our range is suitable to use with acetylene or LPG.
Ideal for use in welding works requiring double lines consisting of oxygen and acetylene gases.
Temperature: from -40°C to +85°C
Our Rubber Welding Hoses need low maintenance cost. Easy installation and resistant to high wear and tear make our Rubber Welding Hoses highly demanding in the markets. We are well reckoned as one of the predominant Gas Welding Hoses Manufacturers and suppliers based in India.
TWIN LINE WELDING HOSE WITH BRASS COUPLING
Complete fitted oxygen and acetylene welding hose sets Available in 3/8" diameter hose in 5mtr, 10mtr or 25mtr lengths
Red and Green Rubber Twin Welding Hose 5/16"* 25FT w/ 1/4"Brass FNPT Fittings
WELDED WIRE MESH
PIPES & FITTINGS
LIFTING TOOLS & TACKELS
RAILWAY TRACK FITTINGS
We offer comprehensive range of high quality forgings, which is manufactured using finest quality metals and alloys. These Components can be designed in several dimensions.
The rail clips and clamps offered by us are very important components that are heavily used in laying of railway tracks. Rail Clips mainly KPO 6, Rail clip No. 5 and 6 with and without cone as per buyers drg and specification.
Railway Track Fittings
Manufactured from a high grade polymer, the chair has been designed to suit 5/8" x 5/8" Flat Bottom Aluminium Rail (16mm High) rail. Very easy to assemble, just slide the rail onto the chair, locate the spigot into the sleeper and screw down.
We provide Mounting Bolts and Inspection Trolleys like GFN Liner / MS Liner, Mounting Supporting Bolts, Stretcher Bar,